Ronan XSD-1000 Manuel d'utilisateur télécharger pdf (Page 20)

Auto System Verification

When you select the Auto Verification function (right-most touch-button on the Main

Screen), the system will auto-finish the Detector and Photo-Eye Verifications if all

functions in these categories pass. This allows you to start the Verification, go to the

Truck Path, test each detector, test each photo-eye, then return to the Monitor Panel, test

the Alarm Relays, and ensure that each function passed.

An optional relay output at the detector frame is available when the detector frame is not

located conveniently to the Monitor Panel. This output will energize for a few seconds

when all detectors have passed, and when all photo-eyes have passed (in Auto

Verification mode), to allow an audible or visual indication of the Auto Verification

process. This output is on the Relay Output Remote I/O Module, Output Number 1.

This screen allows you to continue or abort the Auto Verification process. If you click

(or touch) the Continue button, the system will begin the Detector Stabilization process,

then start the Detector Verification process.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 80 81

Pas de commentaire

Ronan XSD-1000 Manuel d'utilisateur Page 20