Ronan XSD-1000 Manuel d'utilisateur télécharger pdf (Page 21)

Verify Detectors

When you select Verify Detectors from the Manual Verify screen, or press the

AutoVerify button on the Main Screen, you will be presented with the following screen:

In order to perform any detector test, the system must get a stabilized value from each

detector. The progress bar will inform you of the time remaining before testing can

begin.

Once the stabilization has completed, each detector that has been activated and is enabled

will be available for testing. You must place the Test Source supplied with your system

on each detector for three seconds. If the detector is working correctly, the displayed box

for that detector will change to a green color and read “Passed”. In Manual Verification,

you must click on the Finished button to continue, when all detectors have been tested.

In Auto Verification, if all detectors Pass, the system will continue to the Photo-Eye

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 80 81

Pas de commentaire

Ronan XSD-1000 Manuel d'utilisateur Page 21