Ronan X96S LEVEL GAGE Manuel d'utilisateur télécharger pdf (Page 45)

Removing the Detector

Amplifier Circuit Board

(CBAY-6102)

Follow this procedure to remove the electrometer amplifier circuit

board:

1. Remove the amplifier cover by unscrewing the hex socket head

cap screws.

2. Remove the MS connector

from the amplifier cover.

3. Remove the two 6-32

binding head screws, which

secure the amplifier board to

the detector.

4. Using a low power (60W)

iron unsolder the detector

leads to the printed circuit

board standoffs.

CAUTION: Excessive twisting

or bending can damage the

detector leads.

CAUTION: DO NOT over heat

the detector leads. Using long-

nose pliers as a heatsink will

avoid melting the solder at the

detector feed-throu

5. Lift the

board/

connector

assembly

from the

interior of

the detector

housing.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 55 56

Pas de commentaire

Ronan X96S LEVEL GAGE Manuel d'utilisateur Page 45